Once you have designed your Kitchen and chosen your Cabinetry, you can then start to think about your tops. Please keep in mind… Millennium Stone Design uses materials classified A Grade for our products. We do not substitute A Grade for a lesser grade unless requested by you – our client.
Design and Manufacture
Fax, email or bring us a copy of your Building or Kitchen Plan/Drawing if you already know what stone, edging etc…
- Choose your Stone and Colour (Let our helpful staff assist you, by explaining the pros and cons of the options best suited to your budget.) We will bring stone samples with us so you can view the stone options against other proposed décor.
- If you have selected granite or marble as your preferred stone we will arrange for you to inspect the slabs before we manufacture your bench top.
- Choose what type of edge profile and thickness you would like for your tops. When choosing your stone benchtop edges, there are many options. We have listed the different edge profile options for you below:
Several options are available in stone thickness and edge work.
- 20mm thick is the standard thickness.
- 20mm, 30mm, & 40mm (Build up of 2 x 20mm’s)
- Mitred aprons are also available from 60mm to 300mm.
20mm Arris
40mm Arris
20mm Pencil Round
40mm Pencil Round
20mm 10×10 Bevel
40mm 10×10 Bevel
20mm Bullnose
40mm Bullnose
20mm Half Bullnose
20mm Mitred Edge
20mm Shark Nose
4. Will polished holes for sink/basin be required (under mount sinks & basins)
5. Will you be wanting Splash backs in same stone material
6. Once all information is gathered, we can begin pricing.
7. Delivery and installation costs are included within our quote so you have the comfort of knowing there are no hidden costs.
8. We provide one year guarantee on installation.
Please Note: Once our quote is accepted a 50% Deposit is required.
1- Call us to make an appointment for us to attend site to check/measure
2- Once we complete check/measure and make sure cutout positions are correct, we can then start manufacturing your tops. From check/measure to Installation can take anywhere up to two weeks. (Unless commercial project would be up to four weeks depending on time frame)
Installation
1- When manufacturing is complete, we will call to arrange installation.
2- We clean up our mess and remove our unwanted material.
3- On-going advice and feedback from initial quote through to the installation of the product. This free advice includes information on cleaning and maintenance issues.